Easycorder

Introduction Features Technical specifications back to products

Introduction
 
 

The Easycorder is a portable digital PC-Card recorder developed for professional use in electronic news gathering. With its Solid state storage, metal case and wide operating temperature range, it is capable of performing its tasks under very poor conditions.

Build in features such as a graphical editor, several means of communication, and Time Shift Recording make it an extremely versatile tool for the professional user. Thanks to its long lasting smart battery and its large internal storage, recordings of more than several hours are no problem. External storage on PC-Cards extends the recording capacity even further.

With state of the art electronics for the microphone amplifiers, limiter and A/D - D/A conversion the recordings are of outstanding audio quality. A large illuminated screen and illuminated buttons, a mechanical and electrical lock during recording, a large gain level control knob and presets for many operational settings make the Easycorder especially easy to use. Due to a number of supported audio- and file-formats the Easycorder integrates seamlessly with most broadcast automation systems, enabling you to get your scoop on the air in the minimum of time.

The Easycorder is the ideal reporter's tool for obtaining the best recordings under the worst conditions and delivering the material from anywhere in the world to anywhere else in a quick and reliable way!


Features
Recording
  • "TimeShift" recording allows you to start the recording but the unit actually loops a 20 seconds recording in RAM.
  • "SmartSpace" recording allows you to automatically start and stop recording based on sound levels.
  • A lock function can be set to disable all other controls while recording, which helps avoid accidental disruption. 
Storage
  • Internal flash memory; a solid state, reliable and non-removable storage medium provides storage capacity for a minimum of 80 minutes and up to more than 5 hours of broadcast-quality audio recording.
  • Removable harddisk or flashcard for easy and quick audio transfer to broadcast automation systems.
Editing
  • Graphical representation of the audio.
  • Simple non-destructive cut, copy and paste editing, based on markers placed during record and playback.
  • Undo and redo functionality. 
Communication
  • Real-time ISDN communication with playback capability using on-line audio conversion. 
  • File transfer via ISDN, modem and GSM. 
Compatibility
  • Compatible with radio automation systems such as DAVID, Netia, Fairlight and Dalet.
  • Compatible with almost all ISDN codecs such as Telos and several CCS codecs.
Services
  • Software upgrades. 
  • Helpdesk facilities. 
  • Extended warranty options.
  • Service contract. 

 
 


Technical specifications
 
Audio
Signal / noise ratio > 85 dB
Crosstalk < -80 dB
Freq. response 20 Hz-20,000 Hz
Harm distortion < 0.005%
Recording
Audio processing Linear / MPEG-2 Layer II
Audio modes mono / mono-mix / stereo / j-stereo / m-stereo
Bitrate 8 kbps to 384 kbps
Samplerate 11.025 kHz up to 48 kHz
File formats BWF / WAVE / AIFF / RAW MPEG
ISDN (optional)
Audio processing MPEG-2 Layer II / G.722 / G.711
Audio modes mono / mono-mix
Bitrate 64 kbps
Samplerate 24 kHz and 48 kHz
D-channel protocol Austel / CT1 / DSS1 / NI1 / 5ESS / VN3
Input
Analogue in 2x latching XLR mic/line inputs; mic. balanced: -60dBu/-40dBu; line balanced: 0dBu
Digital in 1x cinch (S/PDIF) with sample rate conversion
Audio switches Line, mic, mic -20dB; phantom power (off, 12V, 48V); rumble filter (off/on); limiter (off/on)
Output
Analogue out 2x XLR balanced outputs max.: +13dB. Typical +6dB
Digital out 1x cinch (S/PDIF), 1x XLR balanced (AES/EBU)
Headphones 1x 6.3 mm stereo jack
Speaker 1x integrated (max. 2 Watt)
Power
Adapter 100 - 240 VAC / 12 -24 VDC
Battery pack (optional) NiMH smart battery / life time: 5.5 hours min. / charge time: 2 hours max.
Battery holder 8 C-sized Alkaline batteries
Additional
Environment operation: -20C to +70C, storage -30C to +85C
Dimensions L x W x H = 241 x 192 x 63 MM (including battery pack)
Weight 2.4 kg, including battery pack
Internal storage flash memory: 80 minutes - 5 hours
External storage PCMCIA ATA flash card / harddisk up to 16 hours
Interface (parallel) ECP / PCMCIA socket (type III)

© Maycom. All rights reserved